Main

How to make use of poultry batteries

Although rearing in poultry batteries is the most expensive to establish, it is currently considered the most economical option. To provide an environment less susceptible to disease.

Poultry batteries

Poultry battery components

Poultry batteries are made of galvanized wire mesh and fixed to the battery frame.

Cages are always installed back to back and their doors are opened in a service corridor whose width is not less than 85 cm and preferably 1 m.

The cage door is a space sufficient to remove the bird at the end of the production or sale period, and it opens up, down, or to one side, and it may be sliding.

If the flock is introduced from the age of incubation, a barrier should be made to reduce the opening of the cage so that the bird is allowed to eat and is not allowed to leave the cage.

It is preferable that the front rib of the cage be longer than the rear rib of the cage to provide more feeding area and more lighting area.

The roof and sides of the cage are made of galvanized wire mesh, and there is no problem in increasing the area of its openings.

The sides shall be a mesh of galvanized wire, or closed or perforated galvanized sheet.

The floor of the cage shall be made of wire mesh, with an opening of no more than 1.5 cm to 2 cm. To allow the passing of the geckos and provide a comfortable pause for the birds, and it is inclined 8 degrees so that the eggs roll on it to the collection belt, and it extends outwards from 10 cm to 15 cm to make a support to carry the egg collection belt.

It must be taken into account when receiving the chicks directly in the batteries. We put perforated cardboard paper with a diameter of 1 cm on the floor, so that they can stand safely.

Breeding advantages of poultry batteries

There are many advantages behind rearing in poultry batteries, which are as follows:

Maximum use of the unit area.

High efficiency in controlling the breeding environment inside the house, including ventilation, humidity and temperature.

– Delivery of feed and water in accurate quantities, quality and high cleanliness.

Avoiding litter problems and wasting feed.

- Obtaining clean eggs, unlike ground education.

Ease of dealing with large numbers, especially during immunization.

Reducing the risk of bacterial infections such as coccidia.

Ease of collecting eggs in the case of mothers.

Types of batteries for poultry

There are many types of poultry batteries and they are of three types:

First: the single-level battery:

From one cage and used in research and experiments.

Second: the hierarchical battery:

It is an inverted V-shaped structure, on which the cages are fixed back to back, on both sides of the structure.

– The width of the base of the structure ranged from 160 cm to 240 cm, according to the number of floors, which do not exceed 4 floors, so that the width of the base does not exceed 240 cm.

– The pyramidal battery is installed above its course to collect glaucoma.

– The pyramidal shape allows the blues to fall directly from the cages to the ground, not to other cages.

This type of battery is suitable for open and closed wards.

Third: the vertical battery

It consists of back-to-back cages with a height of up to 8 floors.

- There is a space between every two floors to collect blue on Siro also for ventilation.

- The floor allows the eggs to roll to reach another belt to collect as well.

Only valid in closed wards.

The importance of breeding in poultry batteries

The great role played by poultry batteries in breeding birds or laying hens cannot be overlooked. Therefore, it is always advised to follow the advertisement through which these batteries or their accessories are promoted, whether in animals or breeding chickens, in order to protect them from excessive humidity.

At the same time, these batteries affect poultry prices in Egypt, where they are many advantages as a result of saving in the size of food or transferring at a better height for any bird or chicks that exchange growth roles or the rate of place industry in the breeding center to provide bird care products.

Good hygiene for the animal must also be provided in order to reduce predation. Provide a good capacity for breeding in order to achieve profitable trade. Also, attention should be paid to providing good gas that contributes to the success of the breeding cycle in order to avoid losses in order to achieve profitability from advertisements in companies and try to reduce defects as much as possible .

The temperature inside the batteries must also be taken into account in order to reduce the decrease in the necessary air elements and take into account the difference in the sound elements and breeding or ventilation in the air rates in the wires, as the defects of these used diseases that spread quickly in the floors must be taken into account through a group of elements that assist the breeder.

Basic components of poultry batteries

The small sustainable elements that aid development in the use of the projects are placed in an external framework that provides the necessary support in order to improve the quality of these batteries and avoid placing a drink around them where whole birds must be delivered with the right nutrients.

Another element must also be cultivated by a breeder at the top of these priorities, as it is a major factor in the areas of high breeding in the form of the materials used, such as fodder or others, because they provide meat for these elements using good manufacture for them, because they consist of basic materials manufactured in a good way, as they differ from As it is dedicated to the rapid entry of these diseases.

Many sources of profits can be provided from behind these batteries, as the appropriate number of birds inside the battery is set within only two months. You can reap the fruits of the successful hill of role and provide them through suitable prices, taking into account through them the prices of the feed that you consumed and thus make the highest conservation of the code Or the end resulting from the price in a new form.

Breeders must also take into account the advertisements of the batteries that are frequently promoted, as there can be false advertisements and cause great damage to the breeders, and in that case it is unlikely to reach a successful fattening cycle because it has become of multiple priorities and is not sound. to the other.